R.jpg?2020051615504659)
G80 Ratchet Binder with Safety Hook (TH-670)
■ According to EN12195-3.
■ Handle: forged.
■ Suitable for G80 chain.
■ With G80 eye grab hook with safety pin.
■Not for lifting, only for lashing
PRESS STEEL WIRE ROPE SLINGS
The specification of the wire rope used by the following working load in the table Dia 6mm-60mm use the construction of 6X37(b)-1670; Dia 62mm-120mm use the construction of 8X61(b)-1670; Dia 122mm-190mm use the construction of 8X91(b)-1670.
Different construction of the rope means different working load, we can calculate the working load with the steel wire rope construction that the customer required.
The sling's breaking load is 5 times of its working load.
The pressed type for the rope with dia 90mm is pressed two aluminum ferrule on each end of the sling
R.jpg?2020051615444910)
G80 Eye Sling Hook with Cast Latch(TH-334)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.
EN.jpg?2020051417180399)
Turnbuckles U.S. Federal Specification (FF-T-791B, TYPE1, FORM1)
Turnbuckle assembly aombinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw & Jaw and Eye.
End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
Hot dipped galvanized.
Lock Nuts available for all sizes.
R.jpg?2020051614253778)
G80 Eye Self-Locking Hook with Grip (TH-77)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.
R.jpg?2020051615432198)
G80 Clevis Sling Hook With Cast Latch(TH-333)
■ Powder coated, different color is available as per request.
■ Working load limit permanently shown on the body.
■ Max proof load is 2.5 times of the working load limited.
■ Min. Breaking strength is 4 times of the W.L.L.
JCD VERTICAL LIFTING CLAMPS
JAPAN MODEL
Suitable for vertical lifting of steel plates and steel structures
Capacity: 0.8-20T
Made of high-quality low-carbon alloy steel
It is fitted with a locking device for both open and closed positions,
which ensures complete safety
High-frequency quenching of die-forged special alloy steels
enhance the strength and durability of the tooth plate
The working load is the capacity of one piece. It may be used
singly or pairs of clamp used together
Do not crash the lifted cargos during the lifting and transfer period
CDK VERTICAL LIFTING CLAMPS
Suitable for lifting and transfer of steel plates and steel structures
with all positions (horizontal, vertical and sidelong)
It is fitted with a locking device for both open and closed positions,
which ensures complete safety
It is fitted with a hoisting ring
Made of high-quality low-carbon alloy steel
It may be used singly or pairs of clamp used together
Do not crash the lifted cargos during the lifting and transfer period
PPD HORIZONTAL LIFTING CLAMPS
Europe model
Suitable for lifting and horizontal transfer of steel plates and steel
structures
Capacity: 0.8-16T
Made of high-quality low-carbon alloy steel
The working load limit is the maximum load when the clamp are
used in pairs with a lift angle of 60°. In lifting operation should be
used in pairs or multiples
